Slash pump energy use by up to 90%, saving
hundreds per year !
Standard pool pumps can consume as much energy as all other home appliances combined—often
costing more than $2,000 per year! IntelliFlo® and IntelliPro® Variable Speed pumps can typically
cut energy use up to 90%, generally saving up to $1,500 in utility costs annually.
Exclusive, advanced motor technology typically provides base savings of 30%
·
IntelliFlo pumps use an exclusive permanent magnet motor (used in hybrid cars) in place
of a traditional induction motor. Permanent magnet motors are fundamentally more energy
efficient and provide a typical “base energy savings” of 30%.
Onboard intelligence with variable drive can deliver additional savings up to 90%
·
Variable speed capability, digital controls, and proprietary software that allow custom
programming of optimum pump speeds for specific tasks—filtering, heating, cleaning,
spa jets, waterfalls, etc. The result is additional energy savings...up to 90% compared to
even so-called high efficiency, single-speed, two-speed and multi-speed pumps that
cannot be adjusted.
·
For virtually all applications, the optimum speed will be lower than the preset,
unchangeable speeds of older pumps. Using slower speeds takes advantage of a
fundamental pump law: slower is far more efficient. In fact, when pump speeds are
reduced by half, energy consumption is just one-eighth of what was previously used.
The quietest pumps ever built
·
The exclusive permanent magnet motor that is so critical for energy savings is also a totally enclosed fan cooled (TEFC) design. This
combination, along with slower operating speeds, is responsible for IntelliPro and IntelliFlo pumps being the quietest pumps you can
install. At typical speeds you can barely hear them operating.
Longer trouble-free service life than conventional pumps
·
Advanced motor produces far less heat and vibration than traditional induction motors for dramatically longer equipment life. TEFC
design protects against all threats posed by an outdoor environment.
·
Features built-in diagnostics that detect and correct conditions that cause premature failure, thereby protecting against overheating,
freezing and voltage irregularities. IntelliFlo VF also detects loss of prime.
New Model with Added Safety Features
IntelliFlo VS+SVRS pump is the first pump with an integrated Safety Vacuum Release System (SVRS), which provides an important layer of
entrapment protection. Its built-in controller and proprietary software detect blockage of the drain and automatically turn the pump off within
seconds.
IntelliFlo VS+SVRS meets ASME A112.19.17.2002 standards, thereby complying with new Federal legislation related to public pools (Virginia
Graeme Baker Pool Safety Act), as well as a growing number of state and local statures for residential pools where entrapment protection
measures are required.
*Savings based on comparison pump running between 6 and 12 hours per day at the national average of $0.16/kWh in a 20,000 gallon pool.
Savings may vary based on plumbing size and length, pump model, service factor, flow rates and other hydraulic factors.
ECO INNOVATIONS VI
copyright 2012 I sitemap
3016 Richmond, Christiansted, St. Croix, US Virgin Islands 00820
31 Radets Gade, Charlotte Amalie, St. Thomas, US Virgin Islands 00802
Note to self
Call Eco
Innovations
VI. 226-33
IntelliFlo®
VF High Performance Pump
The intelligent pool pump
that changed all the rules
IntelliFlo® VF High Performance Pump is the world's smartest
swimming pool pump. Its onboard computer and intelligent
software automatically calculate and program the minimum
flow requirements for every pool task - filtering, heating,
cleaning, spa jets, water features and more - to optimize
performance and minimize energy use. As functions/tasks
change, IntelliFlo self-adjusts to maintain optimal flow rates for
further energy savings.
Features
·
Automatically monitors and adjusts flow rates to
optimize performance and minimize energy use -
reduces energy consumption by up to 90%
·
Built-in diagnostics protect the IntelliFlo pump from the
most common causes of premature failure - loss of
prime, overheating, freezing and voltage irregularities
·
Permanent magnet motor and TEFC (totally enclosed
fan cooled) design assure quietest operation of any pool
pump
·
Super-efficient permanent magnet motors produce far
less heat and vibration, resulting in less stress and wear
on pump components for longer life
·
Compatible with IntelliTouch®, EasyTouch® and
SunTouch® pool control systems
·
CE Certified, NSF Certified, UL and CSA Listed
·
Robust On Board Power Factor Correction
IntelliFlo®
VS+SVRS Variable Speed Pumps
IntelliFlo® Variable Speed pumps
combine variable drive technology
Onboard digital intelligence, and permanent magnet motors (used in
hybrid cars) to reduce pump-related energy costs by up to 90%. The new
IntelliFlo VS+SVRS model is the first swimming pool pump to feature a
built-in Safety Vacuum Release System that detects drain blockage and
automatically shuts the pump off.
Features
·
Ability to program exact pump speeds for specfic operation -
filtering, heating, cleaning, spa jets, water features and more -
slashes energy costs up to 90%
·
SVRS model complies with Virginia Graeme Baker Safety Act
·
Built-in diagnostics protect the IntelliFlo pump from the most
common causes of premature failure - overheating, freezing and
voltage irregularities (SVRS model includes priming protection as
well)
·
No SVRS calibrations needed. Built-in SVRS cannot be turned
off.
·
Safety lock-out feature (password protected) on SVRS model
prevents pump speed settings from being changed by unauthorized
personnel
·
Ability to set minimum and maximum speeds on SVRS model so
IntelliFlo will only operate within the ranges set to help assure
safe operation and long life
·
Compatible wth IntelliTouch®, EasyTouch® and SunTouch® pool
control systems
·
NSF Certified, UL and ETL listed as an ASME A112.19.17.2002
Call for Price
340 226 3349
Call for Price
340 226 3349
NSF Certified SA Certified UL Certified
